Archive download-sw /allow-feature-upgrade

You can archive download and upload software image files, which contain the system software, the Cisco IOS code, and the embedded Device Manager software. You can replace the current image with the new one or keep the current image in flash memory after a download. You can also use the boot auto-download-sw global configuration command to specify a URL to use to get an image for automatic software upgrades.

When you enter this command, the master switch uses this URL in case of a version mismatch. You can use this uploaded image for future downloads to the same switch or to another of the same type.

The protocol that you use depends on which type of server you are using. These sections contain this configuration information:. Note For a list of software images and the supported upgrade paths, see the release notes. The Cisco IOS image is stored as a. A subdirectory contains the files needed for web management. The image is stored on the system board flash memory flash:.

You can use the show version privileged EXEC command to see the software version that is currently running on your switch. In the display, check the line that begins with System image file is It shows the directory name in flash memory where the image is stored. You can also use the dir filesystem : privileged EXEC command to see the directory names of other software images that you might have stored in flash memory. Software images on a server or downloaded from Cisco.

Table info File Description. Specifies the Cisco IOS image version string suffix. Specifies the name of the Cisco IOS image in the file. Specifies the size of all the images the Cisco IOS image and the web management files in the file, which is an approximate measure of the flash memory needed. Specifies the minimum amount of DRAM needed to run this image. Describes the family of products on which the software can be installed. You download a switch image file from a server to upgrade the switch software.

You can overwrite the current image with the new one or keep the current image after a download. You upload a switch image file to a server for backup purposes; this uploaded image can be used for future downloads to the same or another switch of the same type. For switch stacks, the archive download-sw and archive upload-sw privileged EXEC commands can only be used through the stack master.

Software images downloaded to the stack master are automatically downloaded to the rest of the stack members. Before you begin downloading or uploading an image file by using TFTP, do these tasks:. To restart the daemon, either stop the inetd process and restart it, or enter a fastboot command on the SunOS 4.

For more information on the TFTP daemon, see the documentation for your workstation. You can download a new image file and replace the current image or keep the current image. To keep the current image, follow Step 2. Optional Downloads the image files from the TFTP server to the switch, and overwrites the current image. The download algorithm verifies that the image is appropriate for the switch model and that enough DRAM is present, or it aborts the process and reports an error.

If there is not enough space to install the new image and keep the current running image, the download process stops, and an error message is displayed. The algorithm installs the downloaded image on the system board flash device flash:. The image is placed into a new directory named with the software version string, and the BOOT environment variable is updated to point to the newly installed image.

For filesystem , use flash: for the system board flash device. For file-url , enter the directory name of the old image. All the files in the directory and the directory are removed.

You can upload an image from the switch to a TFTP server. You can later download this image to the switch or to another switch of the same type. Use the upload feature only if the web management pages associated with Device Manager have been installed with the existing image. Uploads the currently running switch image to the TFTP server. The archive upload-sw privileged EXEC command builds an image file on the server by uploading these files in order: info, the Cisco IOS image, and the web management files.

After these files are uploaded, the upload algorithm creates the file format. You upload a switch image file to a server for backup purposes. You can use this uploaded image for future downloads to the switch or another switch of the same type. You can copy images files to or from an FTP server. When you copy an image file from the switch to a server by using FTP, the Cisco IOS software sends the first valid username in this list:.

The switch sends the first valid password in this list:. The username and password must be associated with an account on the FTP server. If you are writing to the server, the FTP server must be properly configured to accept the FTP write request from you.

Use the ip ftp username and ip ftp password commands to specify a username and password for all copies. Include the username in the archive download-sw or archive upload-sw privileged EXEC command if you want to specify a username only for that operation. If the server has a directory structure, the image file is written to or copied from the directory associated with the username on the server.

For example, if the image file resides in the home directory of a user on the server, specify that user's name as the remote username. Before you begin downloading or uploading an image file by using FTP, complete these tasks:. For more information, see the documentation for your FTP server. You can download a new image file and overwrite the current image or keep the current image. To keep the current image, follow Steps 1 to 6 and Step 8. Optional Enters global configuration mode on the switch.

This step is required only if you override the default remote username or password. Optional Changes the default remote FTP username. Optional Downloads the image files from the FTP server to the switch, and overwrites the current image. Optional Downloads the image files from the FTP server to the switch, and saves the current image. If there is not enough space to install the new image and keep the running image, the download process stops, and an error message is displayed.

The algorithm installs the downloaded image onto the system board flash device flash:. For file-url , enter the directory name of the old software image. You can upload an image from the switch to an FTP server. You can later download this image to the same switch or to another switch of the same type. Uploads the currently running switch image to the FTP server. The archive upload-sw command builds an image file on the server by uploading these files in order: info, the Cisco IOS image, and the web management files.

You can use this uploaded image for future downloads to the same switch or another of the same type. RCP provides another method of downloading and uploading image files between remote hosts and the switch. Forgot your password? Privacy Policy. Password recovery. Recover your password. Get help. How to upgrade a Cisco stack. By Fabio Semperboni. May 23, To upgrade follow these steps: 1.

Download the tar image from the cisco. SE5 Image Directory: cs-universalk9-mz. SE5 Image Name: cs-universalk9-mz. SE3 Old image will be left alone cs-universalk9-mz. SE5 All software images installed. BIN image The.

To upgrade follow this steps: 1. Download the bin image from the cisco. In this case, two are the switches so the commands are: copy ftp: flash1: copy ftp: flash2: 4. Save and reload the device. Comment: Please enter your comment! Previous article Speed up your console. Popular posts. Network address translation NAT is the process of modifying IP address information in IP packet headers while in transit across a traffic routing device. In the previous article, I illustrated what are the dot1x and the benefits related to it.

Just to remember that How to upgrade a Cisco stack Tutorial May 23,